About Heatvape Kayfun Standard 3.1 RBA Atomizer 4.5ml
Determined to add something fresh and new to the vape industry, Heatvape has emerged. This brand creates a large variety of products, each one designed with the same premium materials and with the highest quality production standards to ensure that every product created is something that will be well loved. Heatvape creates mods, RBAs and more to satisfy the needs of every vape enthusiast. Find all of your favorite Heatvape products right here at a price you'll be pleased with.
Heatvape Kayfun Standard 3.1 RBA Rebuildable Atomizer Kit - 4.5ml
Heatvape Kayfun 3.1 RBA Rebuildable Atomizer Kit is a rebuildable atomizer designed to enhance the flavor. With an optional clear polypropylene window, you can see how much is remaining. It uses a chamber to house your wick and coil, which concentrates the vapor and produces a bold flavor.The Kayfun is made of stainless steel
Parameters
Size (length x diameter): 86x22mm
Capacity: 4.5ml
Coil: dual coil or single coil (you should build the coil)
Material: stainless steel
Material of the transparent body: Polycarbonate
Connector: 510 connector
1x Kayfun 3.1 atomizer1x repalcement plastic tube1x pack of wick1x pack of rubber seal rings, post screws and a steel ring1x screwdriver1x 10ml semi-transparent empy bottle with needle tip Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Detailed Instructions
Features
detachable parts
Operation Guide
1. Assembling order
first, Screw the collector-tank in atomizer base.
second, install wick/coil.
Third, screw evaporation chamber into the atomizer base, then body,cover and mouthpiece in succession.
2. Filling e-liquid
Kayfun filling can be done in two ways.
method 1 (classic):
- unscrew the cap.
- pour e-liquid into the space between the body and vaporizing chamber.
- screw the cap back on.
second, install wick/coil.
Third, screw evaporation chamber into the atomizer base, then body,cover and mouthpiece in succession.
2. Filling e-liquid
Kayfun filling can be done in two ways.
method 1 (classic):
- unscrew the cap.
- pour e-liquid into the space between the body and vaporizing chamber.
- screw the cap back on.
method 2 (through the valve):
Filling through the valve, you will need a bottle with a think plastic nose. Nose diameter should be suitable to the illing port.
- turn the mouthpiece down
- insert the nose of the bottle in the valve opening.
- fill the tank by squeezing the bottle. The air will escape from the tank into evaporation chamber through the same grooves.
- take out the nose of the bottle from the valve, turn mouthpiece on.
3. Airflow adjustment
Air inlet can be adjusted through adjustment holes with special screwdriver.
For more details, pls refer to the product introduction.
Order Tips
Rebuildables are for experts, not average or beginner vapers.510 thread, compatible with 510/ego threaded batteries.You should build coil before using.There is CE mark on package box.Steel color also available.
